Installation of Sprocket
Please install the sprocket according to the graphical representation。 NP-8000 Flat Top Radius Modular Conveyor Belt
NP-8000 flat top radius modular conveyor belt is a brand new products designed for logistic industry byNoppzebelt. The minimum inside turning radius is 1000mm which would not change if the belt width change.With the minimum inside turning radius of 1000mm, the belt width could be100mm,200mm,300mm,400mm,500mm to the largest belt width 1600mm.
Driving Mode of NP-8000
For turning conveyors installed with traditional PVC conveyor belt, the belt is fixed with unstable bearing parts, so the lift time of it is very short and the structure of the conveying machine is large; At the same time, the belt is drive by smooth roller, so it is easy to slip, which causes the low tension force and usually affects the production.
NP-8000 Radius Modular Conveyor Belt is designed with module structure, and is drive by sprockets, which solve the slip of belt and ensure the belt in most stable condition in operation.
The bore of NP-8000 sprocket is 50.2mm hexagon, it can be matched with 50mm standard hexagonal shaft, so it is easy to get and process the raw material, more importantly, this design solves the chordal action of quadrilateral shaft and brings more stable operation.
Advantages of NP-8000
NP-8000 Radius Modular Conveyor Belt is stable in operation, and because of its fixed structure design, straight sections are not needed in driving end, which save the manufacturing cost and the space of conveying system.
